[Asterisk-Users] QSIG support in Asterisk

[Olivier Krief]

2006/5/3, Marco Mouta <marco.mouta at gmail.com>:
>
> http://www.voip-info.org/wiki-Asterisk+config+zapata.conf
>
> I've made some tests using this in Portugal and seems to work:
>
> -------------------------------------------------------------------------------
>
> switchtype=qsig  ; you may try this in your zapata.conf
>
> ------------------------------------------------------------------------------
>
> I suppose you are using PRI access.
>
> But i've also red that qsig is not fully compliant in Asterisk. I've found
> some PRI states not recognized in asterisk sending CAUSECODE=98 to my
> legaccy PBX when it seems to me that Asterisk should handle it...
>
> Any ways it seems to work in a standardt architecture:
> PSTN--E1---LegacyPBX---QSIG---Asterisk
>
>
> I hope it helps,
>
>
> Marco Mouta
>
> For curiosity, what sort of benefit were you after using QSIG ?
Most vendors tout SIP as interoperability protocol.
Did you use QSIG as a way, for instance, to provide Message Waiting
Indicator to digital phones ?

Cheers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060504/1a2b1270/attachment.htm