[Asterisk-Users] QSIG support in Asterisk

Marco Mouta marco.mouta at gmail.com
Thu May 4 06:24:51 MST 2006


QSIG was just the protocol communication between Legaccy PBX and Asterisk.

My users connect to Asterisk through SIP

On 5/4/06, Olivier Krief <olivier.krief at gmail.com> wrote:
>
> 2006/5/3, Marco Mouta <marco.mouta at gmail.com>:
>
> > http://www.voip-info.org/wiki-Asterisk+config+zapata.conf
> >
> > I've made some tests using this in Portugal and seems to work:
> >
> > -------------------------------------------------------------------------------
> >
> > switchtype=qsig  ; you may try this in your zapata.conf
> >
> > ------------------------------------------------------------------------------
> >
> > I suppose you are using PRI access.
> >
> > But i've also red that qsig is not fully compliant in Asterisk. I've
> > found some PRI states not recognized in asterisk sending CAUSECODE=98 to my
> > legaccy PBX when it seems to me that Asterisk should handle it...
> >
> > Any ways it seems to work in a standardt architecture:
> > PSTN--E1---LegacyPBX---QSIG---Asterisk
> >
> >
> > I hope it helps,
> >
> >
> > Marco Mouta
> >
> > For curiosity, what sort of benefit were you after using QSIG ?
> Most vendors tout SIP as interoperability protocol.
> Did you use QSIG as a way, for instance, to provide Message Waiting
> Indicator to digital phones ?
>
> Cheers
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060504/2f66bb99/attachment.htm


More information about the asterisk-users mailing list