[Asterisk-Users] problem configuring a digium quad E1 card

[JOSE MANUEL CORTES DAVID]

Hi 
 
You need to use a cross-over E1 cable (not an ethernet cross-over one) 
 
Good luck
 
 
Jose Manuel Cortes David
X Semestre Ingenieria Electronica
PONTIFICIA UNIVERSIDAD JAVERIANA

________________________________

De: asterisk-users-bounces at lists.digium.com en nombre de David Masure
Enviado el: Mié 15/03/2006 9:41
Para: asterisk-users at lists.digium.com
Asunto: [Asterisk-Users] problem configuring a digium quad E1 card


 
Hi,
 
I bought a Digium Quad E1 card  model TE406P.  Till now, I can't make it work...
 
I mean, I have red alarm when I configure one E1.  The provider is in France (France Télécom) and I use the following zaptel config :
 

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
 
I'm using Linux 2.6.15 and when I run ztcfg -vvvv, it seems that all channels are configured...
 
So can someone give me an advice on that matter... maybe someone in France who already configured that type of access.
 
Also, I would like that you confirm the type of cable which can be used to connect the card to the Telco : can I use a straight cable or use a crossed cable with pair 1-2 connect to 4-5 ?
 
Thanks
 
Best regards!
 
David
 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 5719 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060315/804700a4/attachment.bin