[Asterisk-Users] Analog with channel bank - Inbound works, outbound doesn't

[james.texter at cox.net]

I am experimenting with an asterisk setup in my office.  The last bit I have to test is working with analog lines.  I have TE411p digium card, with an ISDN line plugged into the first, a channel bank plugged into the second port, and the last two ports empty.  I have the following setup in my zaptel.conf:

span=1,1,0,esf,b8zs
bchan=1-23
dchan=24

span=2,0,0,d4,ami
fxsks=25

And in zapata.conf, I have:
group=2
language=en
context=from-pstn
signalling=fxs_ks
channel=>25

I have one analog line plugged in for testing.  If I dial that analog number, the inbound call arrives, and it works great.  However, when I place an outbound call, I get the following output:
-- Called g2/5148346
-- Zap/25-1 answered SIP/412-9b72

However, my number never rings.  After about 30 seconds, I get a message saying my call could not be completed as dialed.  Almost like it didn't get all of the digits.  Is there a way to inject a pause before dialing?  Any other thoughts?  Any help is greatly appreciated.