[Asterisk-Users] No audio? Update your Asterisk

Roger Hill rhill at hillconsult.com
Sun Jan 29 20:36:49 MST 2006


Steve:

I'm picking up the tail end of a thread, so apologies if this is offtrack...

Have you perhaps got an old set of EXECUTABLES in your path, that are 
being picked up before your newly compiled ones?

Roger

Steve Gladden wrote:

>Yes I have.
>I have been battling this issue since wednesday 1-25
>And so far have tried many things.
>
>Have also tried RTP debug and do not see ANY RTP when the call is made.
>
>I will keep working at this until I figure it out but right now am very
>stumped and frusterated.
>
>The software update SHOULD have fixed it as it has for many others.
>
>Steve
>
>
>
>
>
>
>
>
>  
>
>>Have you tried increasing the debug level and watching the cli?
>>
>>------------------------
>>
>>    
>>
>>>No Firewalls involved, the test has been simplified down to two sip
>>>phones
>>>on a LAN and still no audio.
>>>
>>>For waht it's worth.... IAX2 still works fine.
>>>
>>>Steve
>>>
>>>-----
>>>
>>>
>>>
>>>      
>>>
>>>>>Yep, tried that.
>>>>>
>>>>>blew away all my source code, re-downloaded re compiled and re
>>>>>installed.
>>>>>it's behaving exactly the same, calls go through but no audio in
>>>>>          
>>>>>
>>>either
>>>      
>>>
>>>>>direction for sip-sip calls on the LAN or to-from the Internet SIP
>>>>>providers tested.
>>>>>
>>>>>I'm at a loss I feel like I have tried everything.
>>>>>
>>>>>even stripped down my configs and tried to make them as simple as
>>>>>possible
>>>>>with nothing more than two SIP phones and a default context.
>>>>>
>>>>>I'm running a 2.4 kernel with USB timimg for ztdummy
>>>>>
>>>>>Another interesting note is that I am getting no DTMF decode
>>>>>with PAP2 devices set to AVT.
>>>>>
>>>>>It was working before Jan 25th along with audio before all suddenly
>>>>>quite
>>>>>working.
>>>>>
>>>>>I set my system and hardware clock back to 00:00 Jan, 01 2006
>>>>>and rebooted the system
>>>>>
>>>>>
>>>>>
>>>>>Anything else I should be checking for?
>>>>>          
>>>>>
>>>>Sounds like maybe a firewall is involved somewhere. Are you sure there
>>>>are none in the path (including on your asterisk box)?
>>>>
>>>>
>>>>_______________________________________________
>>>>--Bandwidth and Colocation provided by Easynews.com --
>>>>
>>>>Asterisk-Users mailing list
>>>>To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>>        
>>>>
>>>_______________________________________________
>>>--Bandwidth and Colocation provided by Easynews.com --
>>>
>>>Asterisk-Users mailing list
>>>To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>      
>>>
>>---------------End of Original Message-----------------
>>
>>
>>_______________________________________________
>>--Bandwidth and Colocation provided by Easynews.com --
>>
>>Asterisk-Users mailing list
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>    
>>
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  
>

-- 
########################################################
Roger Hill				07739 707 180
Perseverance is the hard work you do after you get
tired of doing the hard work you already did.
########################################################




More information about the asterisk-users mailing list