[Asterisk-Users] chan_capi-cm and DID

[Armin Schindler]

On Mon, 16 Jan 2006, richard Coco wrote:
> Hi all,
> 
> i have asterisk 1.0.9 with an Eicon Diva 4bri and
> chan_capi-cm-0.6. I have 2 NTBAs (one with did and one
> without).
> When using the one without did, i am able to place
> outgoing and incoming calls. When i use the NTBAs with
> did i have a layer 2 error.
> 
> Anyone an idea?

Did you load the card with config for DID on that port?
What are your divactrl parameters? (Or do you use
Eicon Package with xml based config?)

Armin 
 
>     -- Executing Dial("SIP/2004-9634",
> "CAPI/g1/43XXXXXX") in new stack
>        > data = g1/43XXXXXX
>        > parsed dialstring: 'g1' '43XXXXXX' ''
>        > capi request group = 2
>        > parsed dialstring: 'g1' '43XXXXXX' ''
>   == EICON: Call CAPI/EICON/43XXXXXX-6   (pres=0x00,
> ton=0x00)
> CONNECT_REQ ID=001 #0x000c LEN=0065
>   Controller/PLCI/NCCI            = 0x1
>   CIPValue                        = 0x10
>   CalledPartyNumber               = <80>43XXXXXX
>   CallingPartyNumber              = <00 80
> 22>EyeBeam<22> <3c>2004<3e>
>   CalledPartySubaddress           = default
>   CallingPartySubaddress          = default
>   BProtocol
>    B1protocol                     = 0x1
>    B2protocol                     = 0x1
>    B3protocol                     = 0x0
>    B1configuration                = default
>    B2configuration                = default
>    B3configuration                = default
>   BC                              = default
>   LLC                             = default
>   HLC                             = default
>   AdditionalInfo
>    BChannelinformation            = <00 00>
>    Keypadfacility                 = default
>    Useruserdata                   = default
>    Facilitydataarray              = default
> 
>     -- Called g1/43XXXXXX
> CONNECT_CONF ID=001 #0x000c LEN=0014
>   Controller/PLCI/NCCI            = 0x201
>   Info                            = 0x0
> 
>     -- EICON: received CONNECT_CONF PLCI = 0x201
> DISCONNECT_IND ID=001 #0x0011 LEN=0014
>   Controller/PLCI/NCCI            = 0x201
>   Reason                          = 0x3302
> 
> DISCONNECT_RESP ID=001 #0x0011 LEN=0012
>   Controller/PLCI/NCCI            = 0x201
> 
>        > CAPI INFO 0x3302: Protocol error layer 2
>   == EICON: CAPI Hangingup
>   == EICON: Interface cleanup PLCI=0x201
>   == No one is available to answer at this time
> 
> my capi.conf looks like:
> [DID]
> controller=1,2,3,4
> isdnmode=did
> incomingmsn=*
> softdtmf=on
> relaxdtmf=on
> accountcode=
> context=DID
> echocancel=yes
> ;echocancelold=yes
> devices=2
> group=1
> 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>