[Asterisk-Users] TE110p and pri_cpe signalling not recognized

[Domjan Attila]

Hi,
I think you didn't install the libpri.

On Thu, 2006-01-05 at 22:48 +0100, Arnar Gestsson wrote:
> Hi guys,
> 
> I've been installing and configuring a TE110p card.  The compile and
> install went very well.  I'm using this on FC4 and I compile with
> linux26 as well checked I on the udev configs. 
> 
> zttool and ztcfg both indicate that the card is ready.
> 
> But when I try to "load chan_zap.so" then I get the following
> 
> 
> Unable to load module chan_zap.so
> Jan  5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown
> signalling method 'pri_cpe'
> Jan  5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must
> be specified before any channels are.
> Jan  5 21:43:33 WARNING[6808]: loader.c:414 __load_resource:
> chan_zap.so: load_module failed, returning -1
> 
> My config is here below.
> 
> TIA
> 
> Arnar Gestsson
> 
> 
> /etc/zaptel.conf
> 
> span=1,1,0,ccs,hdb3,crc4
> 
> loadzone = nl
> loadzone=de
> defaultzone=nl
> 
> bchan=1-5,7-15,17-31
> dchan=16
> 
> /etc/asterisk/zapata.conf
> 
> [trunkgroups]
> trunkgroup => 1,16
> spanmap => 1,1
> 
> [channels]
> language=en
> context=default
> switchtype=euroisdn
> pridialplan=unknown
> signalling=pri_cpe
> ;rxwink=300
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=5.0
> txgain=1.0
> echotraining=yes
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> channel => 1-15,17-31
> 
> 
> 
-- 
Domjan Attila <adomjan at tvnet.hu>