[Asterisk-Users] TE110p and pri_cpe signalling not recognized

[Arnar Gestsson]

Hi guys,

I've been installing and configuring a TE110p card.  The compile and
install went very well.  I'm using this on FC4 and I compile with
linux26 as well checked I on the udev configs. 

zttool and ztcfg both indicate that the card is ready.

But when I try to "load chan_zap.so" then I get the following


Unable to load module chan_zap.so
Jan  5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown
signalling method 'pri_cpe'
Jan  5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must
be specified before any channels are.
Jan  5 21:43:33 WARNING[6808]: loader.c:414 __load_resource:
chan_zap.so: load_module failed, returning -1

My config is here below.

TIA

Arnar Gestsson


/etc/zaptel.conf

span=1,1,0,ccs,hdb3,crc4

loadzone = nl
loadzone=de
defaultzone=nl

bchan=1-5,7-15,17-31
dchan=16

/etc/asterisk/zapata.conf

[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1

[channels]
language=en
context=default
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
;rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=5.0
txgain=1.0
echotraining=yes
group=1
callgroup=1
pickupgroup=1
immediate=no
channel => 1-15,17-31



-- 
Arnar Gestsson <age at trackwell.com>