[Asterisk-Users] TE110p and pri_cpe signalling not recognized

[Arnar Gestsson]

Hi there,

well supposedly I've compiled and installed libpri and it actually
resides in /usr/lib.  I've installed /usr/lib in the /etc/ld.so.conf
explicitly but without a luck.  But I'll check this path anyhow more
thoroughly.

Thanks for the advice.

BR. Arnar


On Thu, 2006-01-05 at 23:01 +0100, Domjan Attila wrote:
> Hi,
> I think you didn't install the libpri.
> 
> On Thu, 2006-01-05 at 22:48 +0100, Arnar Gestsson wrote:
> > Hi guys,
> > 
> > I've been installing and configuring a TE110p card.  The compile and
> > install went very well.  I'm using this on FC4 and I compile with
> > linux26 as well checked I on the udev configs. 
> > 
> > zttool and ztcfg both indicate that the card is ready.
> > 
> > But when I try to "load chan_zap.so" then I get the following
> > 
> > 
> > Unable to load module chan_zap.so
> > Jan  5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown
> > signalling method 'pri_cpe'
> > Jan  5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must
> > be specified before any channels are.
> > Jan  5 21:43:33 WARNING[6808]: loader.c:414 __load_resource:
> > chan_zap.so: load_module failed, returning -1
> > 
> > My config is here below.
> > 
> > TIA
> > 
> > Arnar Gestsson
> > 
> > 
> > /etc/zaptel.conf
> > 
> > span=1,1,0,ccs,hdb3,crc4
> > 
> > loadzone = nl
> > loadzone=de
> > defaultzone=nl
> > 
> > bchan=1-5,7-15,17-31
> > dchan=16
> > 
> > /etc/asterisk/zapata.conf
> > 
> > [trunkgroups]
> > trunkgroup => 1,16
> > spanmap => 1,1
> > 
> > [channels]
> > language=en
> > context=default
> > switchtype=euroisdn
> > pridialplan=unknown
> > signalling=pri_cpe
> > ;rxwink=300
> > usecallerid=yes
> > hidecallerid=no
> > callwaiting=yes
> > usecallingpres=yes
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > cancallforward=yes
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > rxgain=5.0
> > txgain=1.0
> > echotraining=yes
> > group=1
> > callgroup=1
> > pickupgroup=1
> > immediate=no
> > channel => 1-15,17-31
> > 
> > 
> >