[Asterisk-Users] UK X100P installation help

[Paul J. Smith]

Hi,

I've got the latest asterisk at home setup running with SIP.  I've been
trying to tie it in with the PSTN off and on for a while with no
success.  I gave up on ISDN and purchased 2 x100p cards from x100p.com.

I've got the card installed, the machine can see it. 

The problems I have at the moment are

First time I start up the drivers and asterisk, I can call the pstn
number.  The call is detected, the SIP phone rings, you can pick up the
call, but there is nothing but a faint noise.  After that, if you try to
call the number again, it's engaged, as if the x100 P has not dropped
the line, though watching the asterisk log in real time it says it has.

I've looked all over the web for some detailed instructions, but most
just mirror what I've already done.

Is it because I'm in the UK?  I could not find anyone using these in the
UK.  Maybe they don't like UK phone sockets?

My zaptel.conf is

# Span 1: WCFXO/0 "Wildcard X100P Board 1"
fxsks=1
# Global data
loadzone        = uk
defaultzone     = uk


Can anyone help me to get this working?

Thanks.