[Asterisk-Users] Tormenta CAS signaling

[Steve Underwood]

Viktor Tatianin wrote:

>Hi Steve
>
>I attempt change in  zapata.conf
>
>cas=1-15:1101   but use zttool view ABCD bits 1010
>
>Regards,
>Viktor
>  
>
Have you put the E1 in CAS mode with something like:

span=1,1,0,cas,hdb3

Steve

>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Steve Underwood
>Sent: Friday, February 10, 2006 3:25 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [Asterisk-Users] Tormenta CAS signaling
>
>
>Viktor Tatianin wrote:
>
>  
>
>>Hello
>>
>>Can anyone know how may change(inverting) cas signaling ABCD bits at the
>>Tormenta 2 (four E1 ports) cards
>>My cards send idle code ABCD 0101 but my mux which use as channel bank wait
>>ABCD 1001
>>
>>
>>    
>>
>The idle code is set in zapata.conf. For example:
>
>cas=1-15:1101
>
>Sets CAS mode for channels 1 to 15, with the idle pattern 1101.
>
>Regards,
>Steve
>  
>