[Asterisk-Users] Tormenta CAS signaling

[Viktor Tatianin]

Hi Steve

I attempt change in  zapata.conf

cas=1-15:1101   but use zttool view ABCD bits 1010

Regards,
Viktor



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Steve Underwood
Sent: Friday, February 10, 2006 3:25 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Tormenta CAS signaling


Viktor Tatianin wrote:

>Hello
>
>Can anyone know how may change(inverting) cas signaling ABCD bits at the
>Tormenta 2 (four E1 ports) cards
>My cards send idle code ABCD 0101 but my mux which use as channel bank wait
>ABCD 1001
>
>
The idle code is set in zapata.conf. For example:

cas=1-15:1101

Sets CAS mode for channels 1 to 15, with the idle pattern 1101.

Regards,
Steve

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users