[Asterisk-Users] sipura 3000 and other probs

[Jean-François Rousseau]

Hi, I had some problems similar to you, but they disapeared when I installed
the 2.x firmware instead of the 3.x

You might want to try.

Good luck 


___________________________
Jean-François Rousseau
www.sys-tech.net
jrousseau at sys-tech.net
Tél. 24h (418) 520-0739    Télec. (418) 520-4554
1-877-969-tech
Ouverture Technologique

-----Message d'origine-----
De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] De la part de
john at cusick.ws
Envoyé : 9 février 2006 11:38
À : asterisk-users at lists.digium.com
Objet : RE: [Asterisk-Users] sipura 3000 and other probs

With pen in hand, Technical Support succussfully stormed bulwarks which
others armed with sword and excommunication have been repulsed, and said ...
> There's a vox forum that focuses on Sipuras - post your query there 
> for good tech help.  We've deployed a number of Sipura's and haven't 
> experienced that problem (yet).  Have you started with the basics:
> firmware version, analog cabling, etc.
>
> MD
>

Oh yeah... ex Satcom/ISDN tech here and so I checked all the basics, swapped
caples, firmware is the latest, etc. I'll check on the voxilla forum, that
completely slipped my mind.

I was hoping that maybe someone on the list had seen something like this,
particularly given the error from the log I described below:

chan_sip.c: That's odd...  Got a response on a call we dont know about.
            Cseq 102 Cmd SIP/2.0

Does anyone have the time to let me know exactly what this error points to?
When I say exactly, of course I don't mean exactly in my configuration which
none of you have seen, I mean, what is the software seeing that it isn't
prepared to handle. As I also mentioned, I looked at the code, but I'm an
amateur programmer at best, with little experience, not to mention I'm still
learning about the SIP protocol, so I'm just not sure what this is telling
me.

I strongly suspect that this is probably tied in with my situation, but
according to all the docs/forums/setups I've researched, my setup looks OK.

Regards,

John C.

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> Subject: [Asterisk-Users] sipura 3000 and other probs
>
>...
>...
> For example, I'll be talking to an incoming caller and an echo starts  
>quietly in the background. Within a minute or so, I'll lose the  
>connection,  with my voice 100% reflecting back at me, and the caller 
>says the same  occurs at their end, his/her voice 100% reflecting back 
>to him/her.
>
> I usually have to reset the device completely at that point. Other 
> times, I'll get a call and talk for 1/2 hour with no problems whatsoever.
>
> I have it set up with a at h V 2.2 according to the setup at
>
>   http://mundy.org/blog/index.php?p=65
>
> Also I get the following strange error:
>
> chan_sip.c: That's odd...  Got a response on a call we dont know about.
>             Cseq 102 Cmd SIP/2.0
>
> I can't seem to pin it down. I've checked the source (chan_sip.c) and  
>because I'm not well aquainted with the protocol, I'm about as clueless  
>as could be as to what its telling me.
>...


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users