[Asterisk-Users] Telmex PRI line configuration problem

[Oscar Carriles]

Andres,

Thanks for the explanation!



-----Mensaje original-----
De: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] En nombre de Andres
Enviado el: miércoles, 15 de febrero de 2006 1:31
Para: Asterisk Users Mailing List - Non-Commercial Discussion
Asunto: Re: [Asterisk-Users] Telmex PRI line configuration problem


>no cdp enable
>-----------------------------------------------------
>
>1) Is it possible to have CAS framing with no R2?
>  
>
You cannot have CAS and PRI at the same time.  Thats for sure.  Also CAS

goes hand-in-hand with R2.  CAS means Channel Associated Signalling and 
MFC-R2 is the Signalling type used in each of those channels.

>Could be my zaptel.conf look like this?
>
>; no "cas=" defined here cause the driver assigns that to MFCR2
>span 1,1,0,cas,hdb3,crc4,yellow
>bchan=1-15
>bchan=17-31
>dchan=16
>
>Some help needed
>Thanks in advance
>
>Oscar Andrés Carriles
> 
>
>
>  
>


-- 
Andres
Technical Support
http://www.telesip.net


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users