[Asterisk-Users] Telmex PRI line configuration problem

[Andres]

>no cdp enable
>-----------------------------------------------------
>
>1) Is it possible to have CAS framing with no R2?
>  
>
You cannot have CAS and PRI at the same time.  Thats for sure.  Also CAS 
goes hand-in-hand with R2.  CAS means Channel Associated Signalling and 
MFC-R2 is the Signalling type used in each of those channels.

>Could be my zaptel.conf look like this?
>
>; no "cas=" defined here cause the driver assigns that to MFCR2
>span 1,1,0,cas,hdb3,crc4,yellow
>bchan=1-15
>bchan=17-31
>dchan=16
>
>Some help needed
>Thanks in advance
>
>Oscar Andrés Carriles
> 
>
>
>  
>


-- 
Andres
Technical Support
http://www.telesip.net