[asterisk-users] upgrade problem on IP phone 9133i

[Jean-Louis curty]

it is fixed !!! i tried again this morning and it worked the first time ! it
will remain a mystery....

2006/8/31, shadowym <shadowym at hotmail.com>:
>
>  I don't remember all the details.  I think you have to set the IP of the
> PC with the TFTP client as the tftp server on the phone.  I seem to recall
> something about the name of the file as well.  Again, it's quite foggy as I
> did this about a year ago so sorry I can't be of more help.  I remember
> getting those packet fails too until I set up all the parts correctly.  The
> documentation for the phone should have all the info.  If I could figure it
> out I'm sure you can.
>
>  ------------------------------
>  *From:* Jean-Louis curty [mailto:jlcurty at gmail.com]
> *Sent:* Wednesday, August 30, 2006 2:14 PM
>
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] upgrade problem on IP phone 9133i
>
>
>  good idea!
> I tried but it doesn't work either...
>
> [08/30/06 23:12:33] UDP packet receive failed
> [08/30/06 23:12:33] Invalid opcode (0) during transfer received
> [08/30/06 23:12:34] Sending ' firmware.st' to '192.168.0.101'
> [08/30/06 23:12:34] UDP packet receive failed
> [08/30/06 23:12:34] Invalid opcode (12800) during transfer received
> [08/30/06 23:12:43] UDP packet receive failed
> [08/30/06 23:12:43] Invalid opcode (12800) during transfer received
> [08/30/06 23:12:44] UDP packet receive failed
> [08/30/06 23:12:44] Invalid opcode (12800) during transfer received
> [08/30/06 23:12:53] UDP packet receive failed
> [08/30/06 23:12:53] Invalid opcode (12800) during transfer received
> [08/30/06 23:12:54] UDP packet receive failed
> [08/30/06 23:12:54] Invalid opcode (12800) during transfer received
>
>
>
> 2006/8/30, shadowym <shadowym at hotmail.com>:
> >
> > I think this is a known problem that was fixed in v1.3.
> >
> > I think you need to do this upgrade using a 'put' install via tftp
> > client
> > rather than trying to configure it to 'get' from a tftp server.  It's
> > been
> > awhile so my memory is a bit foggy.  I used pumpKIN.
> > http://kin.klever.net/pumpkin/
> >
> >
> >
> > -----Original Message-----
> > From: Jean-Louis curty [mailto:jlcurty at gmail.com]
> > Sent: Wednesday, August 30, 2006 9:07 AM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: [asterisk-users] upgrade problem on IP phone 9133i
> >
> > hi everybody,
> >
> > I bought few units for evaluation but we were not able to upgrade the
> > firmware to 1.4 , it's currently set at 1.2, when we go to the webadmin
> > page,
> >
> > whether we try to change the IP of the tftp server or the firmware name
> > and
> > set values, the reply is always
> >
> > Invalid IP address
> >
> > Please try again
> >
> > if we change the value via the phone itself , the tftp ip is changed but
> > the
> > firmware does not come up ....
> >
> > we are sure of our tftp server since it's used to upgrade other phones
> > from
> > other brands ....
> >
> > any idea ?
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com<http://easynews.com/>--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com <http://easynews.com/>--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060831/ac276c4a/attachment.htm