[Asterisk-Users] Extension Ring on Multiple Phones

[William Piper]

Sure, do something like this:

[telasip-in]
exten => _512879677[67],1,macro(callgroup,s,1)
exten => _879677[67],1,macro(callgroup,s,1)

[macro-callgroup]
exten => s,1,Dial(SIP/120&SIP/121&SIP/122&SIP/124&SIP/125&SIP/126&SIP/127)
exten => s,2,hangup

>From the sounds of it, this would probably work better if you setup call
queues, but the above will do what you are asking.

bp


On 8/30/06, Larry Alkoff <labradley at mindspring.com> wrote:
>
> William I found and fixed the problem.  Your comment gave me the kick to
> persevere.  Thank you very much.
>
> My exten line had a comment at the end that contained a close paren.
> That apparently screwed up the context line - although it shouldn't
> have.  Now all three extensions ring.
>
> Note my mail program wrapped the line but it's not wrapped in the file:
>
> [telasip-in]
> ;===========
> exten =>    _879677[67],1,Dial(SIP/120&SIP/122&SIP/124)  ; to be all
> extensions)
> exten =>    _512879677[67],1,Dial(SIP/120&SIP/122&SIP/124)
>
>
> This leads to another problem.  I have 13 sip phones for [telasip-in]
> and other contexts to call ring groups for extension intercomming.
>
> Is there some kind of macro I could have to replace the instances of:
> (SIP/120&SIP/122&SIP/124)
>
> I have not yet written or read up on macros.
>
> Larry
>
> William Piper wrote:
> > I don't know then, I do the same exact thing:
> > exten => _352688XXXX,3,Dial,SIP/202&SIP/214|20
> >
> > Perhaps try sending everything in that context exactly as it is typed &
> let
> > us look at it.
> > I'm pretty sure you have something configured incorrectly.
> >
> > Thanks,
> >
> > bp
> >
> >
> > On 8/30/06, Larry Alkoff <labradley at mindspring.com> wrote:
> >>
> >> Sorry I was not clear Rushowr.
> >>
> >> In the actual extensions.conf as used, the 'old' line is commented out
> >> so only 'new' is active.  Then I reload.  However, only the single 120
> >> line rings instead of all.
> >>
> >> Larry
> >>
> >> Rushowr wrote:
> >> > Then entire OLD extension must be removed so the new one will match
> >> >
> >> >> -----Original Message-----
> >> >> From: asterisk-users-bounces at lists.digium.com
> >> >> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
> >> >> Larry Alkoff
> >> >> Sent: Tuesday, August 29, 2006 6:49 PM
> >> >> To: Asterisk Users Mailing List - Non-Commercial Discussion
> >> >> Subject: Re: [Asterisk-Users] Extension Ring on Multiple Phones
> >> >>
> >> >> Color me puzzled.  What part of: exten =>
> >> >> _879677[67],1,Dial(SIP/120) should be deleted?
> >> >>
> >> >> Larry
> >> >>
> >> >> William Piper wrote:
> >> >>> Sounds like you still have the old exten still there.
> >> >>> Make sure you get rid of: exten => _879677[67],1,Dial(SIP/120)
> >> >>>
> >> >>> bp
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> Larry Alkoff N2LA - Austin TX
> Using Thunderbird on Linux
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060830/45a51275/attachment.htm