[Asterisk-Users] Sipura SP3000 question

[Andres]

RumaTech wrote:

> Hi, all
>
> I finally got myself one of those SIPURA boxes. It is labeled as 
> Linksys, but this is actually a SP3000 box.
>
> Anyway, unit has lots of configuration parameters. Not all are obvious.
> At the moment it registers against my *, but all the calls I do from 
> analog phone connected to it, go to VoIP channel. As this part is 
> still in testing, I want all the outgoing calls got to PSTN by default 
> and dial, say 0, to get an "outside VoIP line".
> I would like to do it as part of SP3000 configuration, not as part of 
> * dialplan. Can someone help me?
>
Use the gw0 directive in your SPA Dialplan.  For example to get all 7 
digit dialed calls to go out the FXO port, you can put in the following 
code:

xxxxxxx<:@gw0>

> Thanks,
> Rudolf
>
> P.S. I am reading the manual now, but it is rather large. I want to 
> have SP3000 installed now, but to avoid screams from my wife, I want 
> analog phone to work as an analog phone for now while I am playing 
> with configuration and * dialplans.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>


-- 
Andres
Technical Support
http://www.telesip.net