[Asterisk-Users] Asterisk redundancy

[Gary Richardson]

On 4/17/06, Joseph Rothstein <jrothstein at comcentrixs.com> wrote:
>
> Is anyone using a PRI to Ethernet bridge, or any other kind of E1 GW that
> would allow failover to an alternate Asterisk box without manually
> switching
> the cable? This one is a litte
> expensive(
> http://www.mapleleaf-technologies.com/webstore/ethernetbridges.php
> ), but seems like it would do the trick. But I would have to run TDMoE
> between the Asterisk boxes and the bridge. Not a big deal probably, but I
> have no experience with TDMoE


I'm using the PRI to Ethernet bridge from Cisco. It's call a 2800 router
with a T1 card.

Of course, if my router dies, I'm SOL. I could have two routers and balance
calls across them. Of course, any active calls to the dead router would be
lost, but it's pretty cheap, all considering it uses SIP.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060418/f9b30c63/attachment.htm