[Asterisk-Users] Re: callerid name inboune from PRI

[Alexander Lopez]

Don't set immediate=yes, = BAD.

ON your 'did-exten' prepend a step  that adds the wait.

Like so:

Wait(2)
NoOp(${CALLERID(num)})
NoOp(${CALLERIS(name)})
Dial(.....)



>>-----Original Message-----
>>From: asterisk-users-bounces at lists.digium.com 
>>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steven
>>Sent: Monday, April 10, 2006 1:36 PM
>>To: asterisk-users at lists.digium.com
>>Subject: [Asterisk-Users] Re: callerid name inboune from PRI
>>
>>Thanks for the info.
>>
>>I went to add the Wait(2), but am unsure where to do it.
>>My context is "from-pstn".
>>
>>My [from-pstn] is:
>>[from-pstn]
>>exten => s,1,NoOp(${TIMESTAMP} PRI call in)   ;    I tried 
>>adding this to see if "s" is used, but lothing was logged.
>>include => from-pstn-custom                     ; create this 
>>context in extensions_custom.conf to include customizations
>>include => ext-did
>>exten => fax,1,Goto(ext-fax,in_fax,1)
>>
>>My "from-pstn-custom" is non-existent and my "ext-did" is 
>>just an include for "ext-local", which is my inside extensions.
>>
>>If I understand you correctly, I need the wait before I pick 
>>up the line.
>>If I change the span to immediate=yes, I can use the "s" 
>>extension, but It would also answer the line early.
>>
>>I am drawing a blank where to put the wait.
>>
>>Please advise.
>>
>>
>>
>>
>>
>>
>>--
>>--
>>Steven
>>
>>http://www.glimasoutheast.org
>>
>>
>>
>>"Alexander Lopez" <Alex.Lopez at OpSys.com> wrote in message 
>>news:E918F2FD95450648B7F8C957D92D5271422822 at exmail.corp.opsys.com...
>>There is nothing you really need 'to do' if your PRI is 
>>working already, If you are able to receive and make calls 
>>your D-Channel is functioning properly.  In the case of 
>>CallerID, some telcos provide this extra function via the 
>>FACILITY messages instead of the SETUP messages, If that is 
>>the case, you will get no Name but you will get a number. IT 
>>simply means that Asterisk answered the call with the SETUP 
>>message but was unable to read in the CALLERID Name to pass 
>>on to your devices because it comes later on in the call via 
>>the FACILITY.
>>
>>Add a Wait(2) before you answer the call for your PRI, see if 
>>that helps.
>>
>>
>>
>>> -----Original Message-----
>>> From: asterisk-users-bounces at lists.digium.com
>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steven
>>> Sent: Monday, April 10, 2006 8:57 AM
>>> To: asterisk-users at lists.digium.com
>>> Subject: [Asterisk-Users] callerid name inboune from PRI
>>>
>>> I switched PRI vendors recently, and one of my questions 
>>was "do you 
>>> provide caller ID name in addition to number?"
>>> AT&T Local did not, But XO communications said they did.
>>>
>>> Before I call to complain, is there an setting to turn this on in 
>>> asterisk?
>>> I want to make sure that I have my side covered before I call XO.
>>>
>>> My current zaptel.conf is:
>>>
>>> context=from-pstn
>>> switchtype=national
>>> pridialplan=unknown
>>> prilocaldialplan=unknown
>>> priindication = outofband
>>> signalling=pri_cpe
>>> usecallerid=yes
>>> hidecallerid=no
>>> usecallingpres=yes
>>> echocancel=yes
>>> echocancelwhenbridged=no
>>> group=0
>>> callgroup=1
>>> pickupgroup=1
>>> accountcode=I
>>> musiconhold=default
>>> channel => 1-23
>>>
>>>
>>>
>>>
>>> --
>>> --
>>> Steven
>>>
>>> http://www.glimasoutheast.org
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> Asterisk-Users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>_______________________________________________
>>--Bandwidth and Colocation provided by Easynews.com --
>>
>>Asterisk-Users mailing list
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>_______________________________________________
>>--Bandwidth and Colocation provided by Easynews.com --
>>
>>Asterisk-Users mailing list
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>