[Asterisk-Users] Fritz, mISDN, Help

[Konrads Smelkovs]

Isn't billion a HFC PCI card? see lspci output, if so, use bristuff
from junghanns.net
http://www.junghanns.net/en/download.html , i suggest CVS version

On 10/09/05, John Fawcett <johnml at michaweb.net> wrote:
> Jon Dean wrote:
> > A plea to all!
> >
> > Has anyone had any success with two or more avm fritz pci cards with either
> > misdn, chan_misdn, or chan_capi, and any version of linux 2.6.x?
> >
> > I have managed to get misdn to load under 2.6.13 and detect two cards using
> > misdn-capi and chan-capi (using capiinfo and capi info under asterisk) - but
> > the second card/controller doesn't answer or dial calls.
> >
> > But if I try misdn without capi I get the following error
> >
> > mISDN: INTERNAL ERROR in drivers/isdn/hardware/mISDN/stack.c:596
> >
> I have two Billions PCI cards and am using chan_misdn-0.1.1 and kernel
> 2.6.11. I haven't yet been successful at using the second card,
> but it's still work in progress.
> 
> However, I got the above error and resolved it by specifying the
> parameters for both cards when I loaded the relevant driver. In my case:
> 
> modprobe hfcpci protocol=0x2,0x12 layermaster=0xf,0x3
> 
> (the first card is in TE mode the second in NT mode)
> 
> Hope this helps.
> John
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 


-- 
Konrads Smelkovs
Applied IT sorcery.