[Asterisk-Users] rxfax(spandsp-0.0.2pre18) and HT488

[Steve Underwood]

Great log. You carefully stripped out anything that might possibly be 
useful for diagnosise. However, the answer will be the same in any case 
- See http://www.soft-switch.org/foip.html

Regards,
Steve


Zen Kato wrote:

>I chaged to use from 'rxfax' to 'txfax' and I succeeded to receive the
>file from * to the FAX under HT488(firmware 1.0.1.2).
>My OS is 2.6.11-1.27_FC3smp, CVS-v1-0-04/20/05 with ztdummy.
>spandsp is fun!
>
>I made a file:
>Channel: SIP/4881
>MaxRetries: 0
>WaitTime: 20
>Application: txfax
>Data: /usr/home/zenkato/voip/asterisk/fax/tif/receive.tif|caller
> 
>Then I copied this file to /var/spool/asterisk/outgoing.
>The log is as follows;
>*CLI>
>    -- Attempting call on SIP/4881 for application txfax(/home/zenkato/voip/asterisk/fax/tif/receive.tif|caller) (Retry 1)
>       > Channel SIP/4881-baf5 was answered.
>       > Lauching txfax(/home/zenkato/voip/asterisk/fax/tif/receive.tif|caller) on SIP/4881-baf5
>The remote was made by 'Japan Electric'
>The remote was made by 'Japan Electric'
>DIS with final frame tag
>In state 10
>Start tx document
>CFR with final frame tag
>In state 4
>Start tx page 0
>Start tx page 1
>MCF with final frame tag
>In state 14
>May 28 12:35:04 NOTICE[13118]: pbx_spool.c:239 attempt_thread: Call completed to SIP/4881
>--------------
>I can not find out why 'rxfax' does not work. It might stop after the
>end of transmitting file from *. My FAX's LCD shows 'transmission error'.
>
>I attached the log of 'rxfax'. Is 'ECM(Error Correction Mode)'supported
>on spandsp-0.0.2pre18? This is Line 81 of the log. 
>
>Regards,
>
>Zen
>
>
>
>
>
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>