[Asterisk-Users] rxfax(spandsp-0.0.2pre18) and HT488

[Zen Kato]

I chaged to use from 'rxfax' to 'txfax' and I succeeded to receive the
file from * to the FAX under HT488(firmware 1.0.1.2).
My OS is 2.6.11-1.27_FC3smp, CVS-v1-0-04/20/05 with ztdummy.
spandsp is fun!

I made a file:
Channel: SIP/4881
MaxRetries: 0
WaitTime: 20
Application: txfax
Data: /usr/home/zenkato/voip/asterisk/fax/tif/receive.tif|caller
 
Then I copied this file to /var/spool/asterisk/outgoing.
The log is as follows;
*CLI>
    -- Attempting call on SIP/4881 for application txfax(/home/zenkato/voip/asterisk/fax/tif/receive.tif|caller) (Retry 1)
       > Channel SIP/4881-baf5 was answered.
       > Lauching txfax(/home/zenkato/voip/asterisk/fax/tif/receive.tif|caller) on SIP/4881-baf5
The remote was made by 'Japan Electric'
The remote was made by 'Japan Electric'
DIS with final frame tag
In state 10
Start tx document
CFR with final frame tag
In state 4
Start tx page 0
Start tx page 1
MCF with final frame tag
In state 14
May 28 12:35:04 NOTICE[13118]: pbx_spool.c:239 attempt_thread: Call completed to SIP/4881
--------------
I can not find out why 'rxfax' does not work. It might stop after the
end of transmitting file from *. My FAX's LCD shows 'transmission error'.

I attached the log of 'rxfax'. Is 'ECM(Error Correction Mode)'supported
on spandsp-0.0.2pre18? This is Line 81 of the log. 

Regards,

Zen





-------------- next part --------------
A non-text attachment was scrubbed...
Name: txfax-test
Type: application/octet-stream
Size: 3470 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050528/90a8893c/txfax-test.obj