[Asterisk-Users] PRI Cause Code Help

Peter Svensson psvasterisk at psv.nu
Fri Mar 18 12:04:45 MST 2005


On Fri, 18 Mar 2005, Eric Knudson wrote:

> Yeah, I thought the root problem was that the telco was expecting you
> to include some PI , not that the messages were disallowed(order of
> DISCONNECT vs RELEASE COMPLETE), though it appears that sending a
> release complete would be valid based on the clearing procedure
> detailed in fig. A.2/Q.931 (sheet 6 of 7).

Interesting. How do you reach that conclusion? The only fork that can be 
taken in that sheet without first receiving a RELEASE or DISCONNECT is the 
one that begins by sending a DISCONNECT.

> Since the telco is saying that you're not including a PI and that
> seems to be the problem, then it means that they're expecting you to
> tie up a channel for a few seconds and play a message back to the
> caller. I would look for a way that you can manipulate the outgoing
> disconnect cause code and see if you can find something that works.
> Don't know how relevant this is, but are you configured for user side
> or network side signaling?

I think a full pri log and an exceprt from the dialplan may be helpful. 

Peter





More information about the asterisk-users mailing list