[Asterisk-Users] strange dial problem with polycom 501

[Bruno De Luca]

try to see if u have set at sip.conf  *dtmfmode=rfc2833*

Michael George wrote:

>I am having a strange problem with polycom 501 and dailing.  I've read the
>archives and no one there specifically mentions this problem, so I thought I'd
>ask here.
>
>The problem is that when the user picks up the receiver or pressed new call,
>sometimes they will enter a number (for example 95072091234) and in the middle
>of the number the cursor might jump back one digit.  So the call above, if
>just typed into the phone, might end up: 9507291234.  Other times the cursor
>might jump right back to the beginning of the number.
>
>This doesn't happen when they enter the number and the press "dial", so it
>seems to be a digitmap problem.
>
>However, the digitmap is nearly the same as what I've used on IP-500s in the
>past.  It is:
>"[0]|*8|*2xx|#5|#7x|[278]xx|[9]11|9411|9x.T"
>
>[Actually it was " [0]|*8|*2xx|#5|#7x|[278]xx|[9]11|9411|9x.T" -- I don't know
>where that space came from, but I'll take it out and test again today.]
>
>Are there any obvious problems with that digitmap?  Anything else that I
>should take a look at?
>
>Thank you.
>
>  
>


-- 
____________________________________________________________________

 BRUNO DE LUCA
 Tel. +39 02 9350 4780 (102)
 
 FG&A Software
 20017 Rho - Via Puccini, 8

 E-Mail :
bdeluca at fgasoftware.com
 Internet:
http://www.fgasoftware.com