[Asterisk-Users] Re: Call forwarding of IAX inbound call

[Brian Dingman]

Just for others edification. The problem here was that I was not
performing an Answer before issuing the DIAL command to the forwarded
number. Once I did that the calls natively bridged and left my system
completely.


On Sun, 6 Feb 2005 15:31:43 -0500, Brian Dingman <bdingman at gmail.com> wrote:
> I am trying to do the following:
> 1. Call comes in to my * box over IAX (VP Connect DID)
> 2. Check to see if call should be forwarded to my cell
> 3. Forward the call to my cell phone and take * out of the media path.
> 
> I am able to do all of the above except * is not able to natively
> bridge the call. I am using sixtel and for the call forward portion,
> but the calls don't connect before sixtel hangs up.
> 
>     -- Attempting native bridge of
> IAX2/voicepulse-in-01 at 66.234.228.170:4569/1 and IAX2/sixtel/3
>     -- Channel 'IAX2/sixtel/3' ready to transfer
>     -- Releasing IAX2/sixtel/3 and IAX2/voicepulse-in-01 at 66.234.228.170:4569/1
>     -- Hungup 'IAX2/sixtel/3'
> 
> Any thoughts on getting a native bridge between the two providers?
> 
> In iax.conf I DO NOT have notransfer=yes anywhere and am using ULAW
> for both legs.
>