[Asterisk-Users] Asterisk+mgcp setup+vrg 121

[in out]

Hello

I have a Vood vrg 121 (mgcp adapter) that I'm trying to register to my
Asterisk but it doesnt work at all.
I have no earlier  experience using mgcp devices I have just been using sip
phones so dont be to hard ;-)

1) Do I have to do anything special to activate mgcp functionality in * or
is that made by default?
When register sip phones you write "user id" for current sipuser  like
[121212] in sip.conf
In mgcp.conf I have  just seen Ip-adresses in those brackets like [
192.120.0.1] , is there a difference between sip and mgcp when registrating
them

3) Below is my info that I have put in mgcp.conf, below are some rows that I
dont know what they do (what to put there) and I should be really glad if
anyone could tell me what they means.
I have set ???-"number" before that row I have question about

???-1 [121212]
         context=wtlab
???-2 host=172.30.1.126
         callerid = "John Doe" <123>
         callgroup=0
         pickupgroup=0
         nat=no
         threewaycalling=yes
         transfer=yes     ; transfer requires threewaycalling=yes. Use FLASH
to transfer;callwaiting=yes  ; this might be a cause of trouble for ip10s
         cancallforward=yes
???-3  line =>aaln/1

???-1 Can I use current users id or do I have to have an ip-adress here?
???-2 Host, ip of current mgcp adapter/phone or? If yes I guess this means
that I have to change this if device is moved to another place (?)
???-3 What is aaln/1 ?

Thanks in advance!

Regards /D_S
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051227/9acbffe5/attachment.htm