[Asterisk-Users] weird problem with sipura spa2000 and sound cardpa setup

Alexander Lopez alex.lopez at opsys.com
Sun Dec 25 15:11:37 MST 2005


It is posible that your SPA is trying to use a codec that is not
available. I can't tell from the errors you provided.

Double check what codecs the Cisco is using and set the Spa to thwe
same....

Alex
 

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> lee at michwave.com
> Sent: Sunday, December 25, 2005 4:49 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] weird problem with sipura spa2000 
> and sound cardpa setup
> 
> Hello,
>      Just joined this list in hopes of getting an answer to 
> my problem and helping others in the future.  Anyways here is 
> my problem
> 
> 
>      I have asterisk 1.2.1 installed and setup the onboad 
> sound card to autoanswer in the alsa.conf file to act as a pa 
> system.  I currently have the extention setup to 66 to dial 
> the sound card
> 
> exten => 66,1,Dial(Console/dsp)
> 
> If I dial it using my 7940 cisco phone, it works just fine.  
> If I dial it using a cisco ata 186, it works just fine.  If i 
> dial from a phone connected to a sipura spa-2000 i get the 
> following error.
> 
> --------------------------------------------------------------
> ---------------
> 
>     -- Executing Dial("SIP/sipura1-2-bbb8", "Console/dsp") in 
> new stack  << Call placed to 'dsp' on console >>  << Auto-answered >>
>     -- Called dsp
>     -- ALSA/default answered SIP/sipura1-2-bbb8 Dec 26 
> 04:55:14 ERROR[7332]: chan_alsa.c:643 alsa_write: Write 
> error: Unknown error 170  << Hangup on console >>
>   == Spawn extension (localphone, 66, 1) exited non-zero on 
> 'SIP/sipura1-2-bbb8'
> 
> --------------------------------------------------------------
> ---------------
> 
> This leads me to believe I need to change a setting on the 
> sipura for it must be sending something asterisk doesn't 
> like.  Other then this error, the sipura works fine.  I can 
> make and receive calls on it just fine thru either a true 
> voip connection or with my hard line with a x100p card.  I 
> have tried dialing the soundcard with 2 different sipura 
> spa2000 and i get the same error with both.  Anybody else run 
> into this problem?
> 
> 
> -Lee
> 
> 
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 



More information about the asterisk-users mailing list