[Asterisk-Users] Unable to create channel of type 'Zap'

[Nathan C. Smith]

Which side of the span is actually providing the clock?  The Asterisk side
or the other side (telco?)  If it is the telco the clock needs to be set to
'0'.

Span=1,0,0,cas,hdb3

-Nate

-----Original Message-----
From: root linux [mailto:rootlinux at yahoo.com] 
Sent: Sunday, August 21, 2005 10:30 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Unable to create channel of type 'Zap'


My zaptel.conf config: -

# Below setting is for E1
span=1,1,0,cas,hdb3
bchan=1-15 
bchan=17-31 
dchan=16 

loadzone = us
defaultzone=us


My zapata.conf config: -

# Below setting is for E1
switchtype = national
signalling = pri_cpe
group = 1
channel => 1-15
channel => 17-31

My extension.conf config: -

[default]
exten => 181,1,Dial(Zap/1/181)

When I perform a dailing from my SIP Phone, I got the
error message as below: -

    -- Executing Dial("SIP/1183000001-6f4e",
"Zap/1/181") in new stack
Aug 22 11:03:02 NOTICE[9023]: app_dial.c:764
dial_exec: Unable to create channel of type 'Zap'
  == Everyone is busy/congested at this time


I am beginner...How to solve this?




		
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs 
 
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users