[Asterisk-Users] HDLC/Zaptel/Kernel 2.6.11(.9)

[Kristian Kielhofner]

Matt Schulte wrote:
> All,
> 
> 	I'm having a heck of a time getting hdlc to work on kernel
> 2.6.11.9 .. I compiled hdlc, hdlc_gen, hdlc_cisco, hdlc_raw, into the
> kernel (note into, and not 'modules').
> 
> System comes up, I configured zaptel.conf
> 
> span=1,0,0,esf,b8zs
> nethdlc=1-24
> 
> modprobe wct4xxp
> ztcfg
> 
> sethdlc hdlc0 cisco
> ifconfig hdlc0 up
> 
> All of this works fine, believe it or not. I have a T1 cross plugged
> into a cisco 2600 using out of the box configuration. I cannot get line
> protocol to come up on the cisco. Suggestions? Also, doing a ifconfig
> hdlc0 down does a core dump of the kernel, lol. Is this normal?
> 
> I'm using sethdlc 1.15 as mentioned in the wiki instructions.

Matt,

	Normal, yes, good, no.  I have experienced the exact same behavior on a 
number of machines, and so have many others.  The certainly seems to be 
in zaptel (zt_net_stop, if I recall), but I don't know if it is 
"priority" or not...


-- 
Kristian Kielhofner