[Asterisk-Users] chan_skinny issue turned to chan_sccp issue.

Joseph tech at ekn.com
Sat Aug 13 08:54:07 MST 2005


Jason wrote:
> Couple questions since I finally got chan_sccp to work.  1. Has anyone 
> successfully gotten it to work behind NAT, i called my isp and asked 
> them for 35 more ip's and they laughed at me + the cost of getting them 
> would far outdo the benifits. and 2. can someone show me a config with a 
> multi phone configuration

I don't know about the nat, but don't think it should be a problem.
It does not work like SIP where the port stuff is determined via the sip 
protocl.

In your sccp.conf file, you have the [devices]

There you enter the device settings and then the device => SEPxxx
And add some more settings and then your device=> SEPxxx
and so on for as many devices as you need.

You need to then go to the [lines] and add at least one line for each 
device as well.

Are you using the 20050805 release?
You can look at the sample sccp.conf file for the settings.

>>> ftp://ftp.berlios.de/pub/chan-sccp/

There is a mailing list there as well.

>>>
>>> He is the most helpful person I've ever met.  If you find a bug, 
>>> report it to him, and it's usually fixed by the next day!!  I don't 
>>> have the same phone, but I've used 7910/40/60 with sccp and it works!

I have to agree, he has been very helpfull.

>> ...and he is on vacation at the moment to recover from all the hot bug 
>> fixing :-)
-- 

respectfully, Joseph
--------------------



More information about the asterisk-users mailing list