[Asterisk-Users] How to fix a Blue Alarm?? Line Noise?

[Geoff Manning]

Kevin P. Fleming wrote:
> Geoff Manning wrote:
> 
>> The TE110P card in the Asterisk server is set as the sync source:
>> 
>> span=1,1,0,d4,ami
>> e&m=1-24
> 
> That is incorrect. You have your span configured to recover timing
> from the T1 and use that as the source for the card. If you want this
> span to be clocked using the onboard clock on the board, you must use:
> 
> span=1,0,0,d4,ami

I though setting it at 0 was to tell asterisk not to be the source of the
timing. When I set it at 1 I get slip errors inplace of the blue alarms. I
must have had my logic backwards.

Thanks,
Geoff