[Asterisk-Users] Problems with zaptel.conf

[Mike Putnam]

Dang..I actually know the answer to this one...I think. Amazing what 
switching from AAH to doing it all yourself will teach you. Ugh...

zaptel.conf needs to be copied from /etc/asterisk to /etc. That's what was 
causing the issue for me.

Now if you run ztcfg, it should show you your ports and asterisk should 
start fine. Or at least the current error should go away.

Mike

----- Original Message ----- 
From: "Claudio Canseco" <claudio.canseco at gmail.com>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, August 10, 2005 3:29 PM
Subject: [Asterisk-Users] Problems with zaptel.conf


Hello.

I am new to Asterisk but I have been reading like for a month all de
documentation and tutorials that i have found. Most of them from de
voip-info.org.  Recently I set up an Asterisk server based on Debian
'Sarge' 3.1.

Everthing was looking fine. I even locate an old modem that would work
like a X100P Clone (an Ambient MD3200) and after compiling and
installing zaptel it is recognized as a "Wildcard FXO: Generic Clone".
At this point I compiled asterisk (libpri no) and use the 'make
samples' command to help me out with the configuration, then I edited
the next files:
    - extensions.conf
    - sip.conf
    - zapata.conf
    - zaptel.conf

The main configuration consists in:
   - 1 PSTN connection (the FXO card)
   - and 3 SIP extensions (softphones)

Well, the problem is that when I start asterisk it stops giving me the
next errors:

 [chan_zap.so] => (Zapata Telephony)
  == Parsing '/etc/asterisk/zapata.conf': Found
Aug 10 13:20:51 WARNING[1179]: chan_zap.c:890 zt_open: Unable to
specify channel 1: No such device or address
Aug 10 13:20:51 ERROR[1179]: chan_zap.c:6639 mkintf: Unable to open
channel 1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Aug 10 13:20:51 ERROR[1179]: chan_zap.c:10019 setup_zap: Unable to
register channel '1'
Aug 10 13:20:51 WARNING[1179]: loader.c:403 __load_resource:
chan_zap.so: load_module failed, returning -1
Aug 10 13:20:51 WARNING[1179]: loader.c:543 load_modules: Loading
module chan_zap.so failed!

I dont know why this is happening, I configured the only posible
channel like this in zaptel.conf :
    Loadzone=mx
    defaultzone=mx
    fxsks=1

But if I comment fxsks=1 from the zaptel.conf, asterisks start pretty
well and my sip extensions work perfect. Well that's it, if anyone can
help me please it would be very appreciated.

Atte
Claudio Canseco
Asterisk newbie

PS: sorry for the long mail
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users