[Asterisk-Users] TDM40B and weird analog problem

[Tom Rymes]

Hmmm.. This is odd. Can you log on to the asterisk console (asterisk -r)
and post what is happening when you pick up the line? Also, it couldn't
hurt to post the contents of your:

/etc/zaptel.conf
/etc/asterisk/zapata-auto.conf
/etc/asterisk/zapata_additional.conf

Tom

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> maoleson at mchsi.com
> Sent: Wednesday, August 10, 2005 4:23 PM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] TDM40B and weird analog problem
> 
> 
> Tom,
> 
> Thanks for the response, here are my answers.
> 
> How did you set up the zaptel cards originally? 
> - I used the digium install instructions and genzaptelconf
> 
> Did you remember to plug in a power adapter to the TDM card?
> - Yes, both cards are powered.
> 
> Also, to clarify, if you plug a cordless phone into port1 of 
> the FXS card and 
> pick up the phone to dial, all of the other ports on the FXS 
> card ring?
> - No, when I pick up the phone to dial all SIP extensions 
> start to ring.
> 
> This is before you dial?
> - Yes
> 
> Does the incoming FXO card's ports work fine? Incoming calls 
> are routed 
> properly?
> - Yes and Yes
> 
> Have you tried removing the ring group and testing then?
> - Yes, to no avail.
> 
> Any further help would be greatly appreciated.
> 
> Thanks,
> Marc
> 
> -----Original Message-----
> How did you set up the zaptel cards originally? Have you run 
> genzaptelconf? Did 
> you remember to plug in a power adapter to the TDM card?
> Also, to clarify, if you plug a cordless phone into port1 of 
> the FXS card and 
> pick up the phone to dial, all of the other ports on the FXS 
> card ring? This is 
> before you dial?
> Does the incoming FXO card's ports work fine? Incoming calls 
> are routed 
> properly?
> Have you tried removing the ring group and testing then?
> Tom
> -----Original Message-----
> From:	asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> maoleson at mchsi.com
> Sent:	Wednesday, August 10, 2005 1:06 PM
> To:	asterisk-users at lists.digium.com
> Subject:	[Asterisk-Users] TDM40B and weird analog problem
> 
> 
> OK, I have a Asterisk @ Home 1.0.7 server with two Digium 
> TDM400 cards, one 4 
> port FXO and one 4 port FXS.  When I plug an analog cordless 
> phone into the 
> TDM40B card and setup a ZAP extension, the phone rings in and 
> you can answer 
> just fine.  The weird part is when you try to get dialtone 
> from the cordless 
> handset it rings all of the other extensions...  One other 
> thing to mention is 
> that the cordless phone is a part of a ring group that rings 
> 4 total extensions 
> but that should only be on the incoming ringing, right?
> 
> Any help is greatly appreciated.
> 
> Thanks,
> Marc
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit: 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> 
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users To 
> UNSUBSCRIBE or 
> update options visit: 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>