[Asterisk-Users] Cisco 7960 won't register as SIP device

[List Receiver]

Aye...that was it...

Thanks a billion!

> -----Original Message-----
> From: Robert Webb [mailto:rwebb at ropeguru.com] On Behalf Of Robert Webb
> Sent: Saturday, April 23, 2005 8:54 AM
> To: rwebb at ropeguru.com; Asterisk Users Mailing List - 
> Non-Commercial Discussion; List Receiver
> Subject: RE: [Asterisk-Users] Cisco 7960 won't register as SIP device
> 
>  
> 
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf 
> Of Robert 
> > Webb
> > Sent: Saturday, April 23, 2005 11:42 AM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion; List 
> > Receiver
> > Subject: RE: [Asterisk-Users] Cisco 7960 won't register as 
> SIP device
> > 
> > <SNIP>
> >  
> > > #user_info: phone
> > > 
> > > # SIP Configuration File (stop)
> > > 
> > > When the phone tries to register, all I get in the Asterisk
> > console is
> > > this:
> > > 
> > > Apr 23 08:22:29 NOTICE[26568]: chan_sip.c:8804
> > > handle_request_register:
> > > Registration from
> > > '<sip:tycisco at asterisk.mastermindpro.com;user=phone>'
> > > failed for '24.18.147.95'
> > 
> > 
> > I am unfamiliar with the Cisco configs but I am just comparing your 
> > error message to what you have in the config to make this 
> suggestion. 
> > In the error it has "user=phone" and in your config commented out 
> > there is
> > "#user_info: phone". What if you tried uncommenting that line and 
> > putting in "username"? It could be that when thatline is commented 
> > out, it uses "phone" by default.
> > 
> > Robert
> > 
> 
> 
> Actually after getting into the Cisco site it looks like you 
> want a value of "none" for that.
> 
>  Configures the "user=" parameter in the REGISTER message. 
> Valid values
> are:
> 
>     * none-No value is inserted.
>     * phone-The value user=phone is inserted in the To, From, 
> and Contact Headers for REGISTER.
>     * ip-The value user=ip is inserted in the To, From, and 
> Contact Headers for REGISTER.
> 
> The default value is none.
> 
> 
> It says the default value is "none" but you may want to hard 
> code it as it looks like that is not what it is doing.
> 
> 
> 
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3032 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050423/f1952746/smime.bin