[Asterisk-Users] can't make my PRI dial out

[Andrew Kohlsmith]

On April 22, 2005 11:48 am, Mark Phillips wrote:
> Nothing happens. I get the same (non)error.
> I get plenty of output when receiving a call however.

Odd...  Here is my zapata.conf setup for my PRI:

-----------------------
[channels]
context=BellPRI

switchtype=national
pridialplan=unknown
priindication=outofband
overlapdial=no
signalling=pri_cpe

usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes

echocancel=yes
echocancelwhenbridged=no
echotraining=no
relaxdtmf=no

group=1
callgroup=1
pickupgroup=1
immediate=no
callerid=asreceived
channel => 1-23
-----------------------

I simply Dial(Zap/g1/5551212).  The fact that it doesn't think it can pick up 
a channel is interesting, I haven't run across that before.   Combined with 
the fact that you can receive calls just fine, this is a very strange little 
problem.

With my config (modified for your switchtype and context ONLY), what do you 
get when you try to dial a number? 

-A.