[Asterisk-Users] can't make my PRI dial out

[Mark Phillips]

I made my zapata.conf look like the below (with relevant changes) and 
then programmed exten 3701 to dial my cell phone (I'm working remotely 
on this).

I added the line

exten => 3701,1,Dial(Zap/g1/19173657597)

to extensions.conf and get this output from pri debug span 1 when I dial it

-- Making new call for cr 32771
 > Protocol Discriminator: Q.931 (8)  len=54
 > Call Ref: len= 2 (reference 3/0x3) (Originator)
 > Message type: SETUP (5)
 > [04 02 80 90]
 > Bearer Capability (len= 4) [ Ext: 1  Q.931 Std: 0  Info transfer 
capability: Speech (0)
 >                              Ext: 1  Trans mode/rate: 64kbps, 
circuit-mode (16)
 >                              Ext: 0  User information layer 1: 
Unknown (24)
 > [18 03 a9 83 81]
 > Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, 
Exclusive Dchan: 0
 >                        ChanSel: Reserved
 >                       Ext: 1  Coding: 0   Number Specified   Channel 
Type: 3
 >                       Ext: 1  Channel: 1 ]
 > [28 0e b1 4d 61 72 6b 20 50 68 69 6c 6c 69 70 73]
 > Display (len=14) Charset: 31 [ Mark Phillips ]
 > [6c 08 21 83 32 32 32 32 30 38]
 > Calling Number (len=10) [ Ext: 0  TON: National Number (2)  NPI: 
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
 >                           Presentation: Presentation allowed of 
network provided number (3) '17323571400' ]
 > [70 0c 80 31 39 31 37 33 36 35 37 35 39 37]
 > Called Number (len=14) [ Ext: 1  TON: Unknown Number Type (0)  NPI: 
Unknown Number Plan (0) '19173657597' ]
     -- Called g1/19173657597
< Protocol Discriminator: Q.931 (8)  len=9
< Call Ref: len= 2 (reference 3/0x3) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 02 83 e4]
< Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0 
Location: Transit network (3)
<                  Ext: 1  Cause: Invalid information element contents 
(100), class = Protocol Error (6) ]
-- Processing IE 8 (cs0, Cause)
     -- Channel 0/1, span 1 got hangup
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
     -- Hungup 'Zap/1-1'

my call gets hung up immediatly.

I know we are moving forward. I didn;t get this last time I tried to dial.

Mark

Andrew Kohlsmith wrote:
> On April 22, 2005 11:48 am, Mark Phillips wrote:
> 
>>Nothing happens. I get the same (non)error.
>>I get plenty of output when receiving a call however.
> 
> 
> Odd...  Here is my zapata.conf setup for my PRI:
> 
> -----------------------
> [channels]
> context=BellPRI
> 
> switchtype=national
> pridialplan=unknown
> priindication=outofband
> overlapdial=no
> signalling=pri_cpe
> 
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> 
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=no
> relaxdtmf=no
> 
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> callerid=asreceived
> channel => 1-23
> -----------------------
> 
> I simply Dial(Zap/g1/5551212).  The fact that it doesn't think it can pick up 
> a channel is interesting, I haven't run across that before.   Combined with 
> the fact that you can receive calls just fine, this is a very strange little 
> problem.
> 
> With my config (modified for your switchtype and context ONLY), what do you 
> get when you try to dial a number? 
> 
> -A.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>