[Asterisk-Users] can't make my PRI dial out

Marc Storck marc.storck at msnetworks.lu
Fri Apr 22 09:07:37 MST 2005


Mark, that's what the command pri debug span 1 does, produce a lot of 
output so you can see what is received and what is sent. Maybe you can 
paste the output to pastebin.ca and tell us the link.

Regards,

Marc

Mark Phillips wrote:
> Nothing happens. I get the same (non)error.
> 
> I get plenty of output when receiving a call however.
> 
> Mark
> 
> Andrew Kohlsmith wrote:
> 
>> On April 22, 2005 10:41 am, Robert Webb wrote:
>>
>>> Your zapata.conf should look like this:
>>>
>>> language=en
>>> context=default
>>> switchtype=4ess
>>> pridialplan=unknown
>>> signalling=pri_cpe
>>> echocancel=yes
>>> group=1
>>> channel=>1-23
>>>
>>> You need to move the echocancel and the group above the
>>> channel line. The channel line definitions must be above
>>> and not below.
>>
>>
>>
>> You're right, but that's not his problem.  Cause code 0 is no cause 
>> code at all; I'd turn on "pri debug span 1" output and see what's 
>> coming up there.
>>
>> -A.
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list