[Asterisk-Users] wcfxo load problem

[Carlos Medina]

Hi all, i have an Asterisk server with the following hardware configuration:
- 2 ethernet cards (e100, 8139too)
- 1 TDM22B : 2 Ports FXS & 2 Ports FXO
- 1 TDM04B: 4 Ports FXO bundle
 
When i load the FXS module (modprobe wcfxs) its just fine, but when i load the FXO module (modprobe wcfxo) appears the following error:
 
"/lib/modules/2.4.20-31.9/misc/wcfxo.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-31.9/misc/wcfxo.o: insmod /lib/modules/2.4.20-31.9/misc/wcfxo.o failed
/lib/modules/2.4.20-31.9/misc/wcfxo.o: insmod wcfxo failed"
 
Maybe its a hardware conflict with the IRQ, i dont know if there is a way to change the IRQ parameters and if so how can i do it?
 
Thanks for your help.
 
Carlos Andres Medina


		
---------------------------------
Do you Yahoo!?
vote.yahoo.com - Register online to vote today!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040920/e737037d/attachment.htm