<DIV>Hi all, i have an Asterisk server with the following hardware configuration:</DIV>
<DIV>- 2 ethernet cards (e100, 8139too)</DIV>
<DIV>- 1 TDM22B : 2 Ports FXS & 2 Ports FXO</DIV>
<DIV>- 1 TDM04B: 4 Ports FXO bundle</DIV>
<DIV> </DIV>
<DIV>When i load the FXS module (modprobe wcfxs) its just fine, but when i load the FXO module (modprobe wcfxo) appears the following error:</DIV>
<DIV> </DIV>
<DIV>"/lib/modules/2.4.20-31.9/misc/wcfxo.o: init_module: No such device<BR>Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.<BR> You may find more information in syslog or the output from dmesg<BR>/lib/modules/2.4.20-31.9/misc/wcfxo.o: insmod /lib/modules/2.4.20-31.9/misc/wcfxo.o failed<BR>/lib/modules/2.4.20-31.9/misc/wcfxo.o: insmod wcfxo failed"</DIV>
<DIV> </DIV>
<DIV>Maybe its a hardware conflict with the IRQ, i dont know if there is a way to change the IRQ parameters and if so how can i do it?</DIV>
<DIV> </DIV>
<DIV>Thanks for your help.</DIV>
<DIV> </DIV>
<DIV>Carlos Andres Medina<BR></DIV><p>
<hr size=1>Do you Yahoo!?<br><a
href="http://vote.yahoo.com">vote.yahoo.com</a> - Register online to vote today!