[Asterisk-Users] Leading '0's and what do 'pri_dialplan', 'pridialplan' and 'prilocaldialplan' in zapata.conf do?

[David]

Nick,

I too battled a similar problem with my TDM400p.  I solved it by putting the
following in the channel descriptions in zapata.conf:

stripmsd=0

Clearly this is not the default which I think should be obvious...

David

Nick Barnes said:
>
> Hi all,
>
> I've been batting my head against a brick wall for the best part of the day
> and still haven't got any further (apart from getting a big headache, that
> is). I've searched the Wiki and Googled the hours away, but I still can't
> find supportive documentation.
>
> I've just replaced my ISDN Fritz!/chan_capi setup with a HFC/Zap
> configuration and had the following problems:
>
> 1 - Outbound dialed numbers had the MSD stripped off
> So, I issue the command 'Dial(Zap/g1/0123456) and Zap tries to dial
> '123456'. It took a bit of digging to actually work out what the problem was
> in the first place, but I managed to resolve this by setting
> 'pridialplan=unknown' in zapata.conf.
>
> 2 - Inbound CallerIDs have the MSD stripped off (only tested with UK
> numbers, where the leading '0' is removed). I have no idea whether
> international callerids would be similarly treated. I cannot find any
> explanation for this 'feature' at all - it doesn't seem that anybody else
> has had this problem at all, so I am at a loss as to what to do.
>
> Various documentation also talks about 'pri_dialplan' which doesn't seem to
> be supported any more, and also 'prilocaldialplan' which doesn't seem to be
> documented anywhere, but also doesn't seem to make any difference to this
> problem.
>
> Does anybody have any idea where I should be looking to try to find the
> answers? I'm more than happy to do the reading/learning myself - all I need
> is a starting point. I've tried to have a look through the code itself, but
> my programming skills started to rust 15 years ago and they're almost
> completely non-existant now :-(
>
> Many thanks in advance of your help,
>
> Nick Barnes
>
>
> Asterisk version
> ------------------------------
> CVS-HEAD-08/13/04-12:00:00-BRI-stuffed-0.1.0-RC4a
>
>
>
> zaptel.conf
> ------------------------------
> loadzone=uk
> defaultzone=uk
>
> span=1,1,3,ccs,ami
> bchan=1-2
> dchan=3
>
>
>
> zapata.conf
> ------------------------------
> switchtype=euroisdn
> signalling=bri_cpe_ptmp
> pridialplan=unknown
> prilocaldialplan=unknown
> echocancel=yes
> immediate=no
> usecallerid=yes
> callerid=asreceived
> group=1
> context=from-zap
> channel => 1-2
>
>