[Asterisk-Users] Type of T1 for T100P card

[Brian McSpadden]

I agree...T1's in Asterisk do RBS (like E&M for example), T1, PRI,
etc. You can even have it emulate regular loop start lines and push
them through a standard channel bank and it will just use ls
signalling. It is all in how you configure the channels in zaptel and
zapata.

Brian


On Wed, 27 Oct 2004 17:27:29 -0500, Josh Roberson
<twisted at indigent-networks.com> wrote:
> Cirelle Enterprises wrote:
> 
> 
> 
> >----- Original Message -----
> >From: "Pedro Aguayo" <paguayo at teachscape.com>
> >To: <asterisk-users at lists.digium.com>
> >Sent: Wednesday, October 27, 2004 6:18 PM
> >Subject: [Asterisk-Users] Type of T1 for T100P card
> >
> >
> >| I'm currently setting up a PBX system using the T100P card, and was
> >| wondering if it can handle the 2-way trunk type of T1s. Do 2-way trunk
> >| T1s use RBS signaling?
> >| Please excuse my ignorance, I have mostly dealt with PRI B and D channel
> >| type of T1s.
> >|
> >| Thanks
> >|
> >| Pedro
> >
> >I found out by taking the long way around, the t100p requires the t1 pri
> >hybrid isdn bchan, dchan  A standard 24 timeslot t1 will not work.
> >
> >regards
> >greg
> >
> >
> >
> I apologize if i'm not understanding exactly wtf you're saying here, but
> if i'm reading this correctly, I COMPLETELY disagree.
> 
> I have MANY instances of t100p's on a normal 24 channel t1 (rbs),  and a
> few on PRI's using standard B and D channels. It will work fine as long
> as it's configured properly.
> 
> -Josh
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>