[Asterisk-Users] Type of T1 for T100P card

[Henry Devito]

I too have a T100P's working on standard T1 and PRI's.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Josh Roberson
Sent: Wednesday, October 27, 2004 5:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Type of T1 for T100P card

Cirelle Enterprises wrote:

>----- Original Message ----- 
>From: "Pedro Aguayo" <paguayo at teachscape.com>
>To: <asterisk-users at lists.digium.com>
>Sent: Wednesday, October 27, 2004 6:18 PM
>Subject: [Asterisk-Users] Type of T1 for T100P card
>
>
>| I'm currently setting up a PBX system using the T100P card, and was 
>| wondering if it can handle the 2-way trunk type of T1s. Do 2-way trunk 
>| T1s use RBS signaling?
>| Please excuse my ignorance, I have mostly dealt with PRI B and D channel 
>| type of T1s.
>| 
>| Thanks
>| 
>| Pedro
>
>I found out by taking the long way around, the t100p requires the t1 pri
>hybrid isdn bchan, dchan  A standard 24 timeslot t1 will not work.
>
>regards
>greg
>
>  
>
I apologize if i'm not understanding exactly wtf you're saying here, but 
if i'm reading this correctly, I COMPLETELY disagree.

I have MANY instances of t100p's on a normal 24 channel t1 (rbs),  and a 
few on PRI's using standard B and D channels. It will work fine as long 
as it's configured properly.

-Josh

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users