[Asterisk-Users] Digium Wildcard T1 Compatibility

[Cirelle Enterprises]

----- Original Message ----- 
From: "Steve Underwood" <steveu at coppice.org>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Sent: Monday, October 25, 2004 10:28 AM
Subject: Re: [Asterisk-Users] Digium Wildcard T1 Compatibility

| >
| >zaptel.conf:
| >span=1,1,5,esf,b8zs
| >nethdlc=1-24
| >loadzone = us
| >defaultzone=us
| >
| >
| >zapata.conf
| >switchtype = national
| >signalling = pri_cpe
| >loadzone=us
| >defaultzone=us
| >  
| >
| If you want to use the whole T1 for HDLC, why have you configured it as 
| an ISDN PRI line?
| 
| Steve
| 

from what I understand zapata.conf only comes into play when asterisk
is running.  According to digium, the only config that matters for hdlc is
the zaptel.conf.  In this case asterisk is not running.

Greg