[Asterisk-Users] Digium Wildcard T1 Compatibility

[Steve Underwood]

Cirelle Enterprises wrote:

>----- Original Message ----- 
>From: "Steve Underwood" <steveu at coppice.org>
>To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
>Sent: Monday, October 25, 2004 10:28 AM
>Subject: Re: [Asterisk-Users] Digium Wildcard T1 Compatibility
>
>| >
>| >zaptel.conf:
>| >span=1,1,5,esf,b8zs
>| >nethdlc=1-24
>| >loadzone = us
>| >defaultzone=us
>| >
>| >
>| >zapata.conf
>| >switchtype = national
>| >signalling = pri_cpe
>| >loadzone=us
>| >defaultzone=us
>| >  
>| >
>| If you want to use the whole T1 for HDLC, why have you configured it as 
>| an ISDN PRI line?
>| 
>| Steve
>| 
>
>from what I understand zapata.conf only comes into play when asterisk
>is running.  According to digium, the only config that matters for hdlc is
>the zaptel.conf.  In this case asterisk is not running.
>  
>
Er, yeah,  shouldn't post while half asleep :-)

Steve