[Asterisk-Users] Samsung DCS70 PABX

[Henry Devito]

Should be easy enough.  It is especially simple if they have enough
bandwidth at each site.  You can add additional PRI cards in the Samsungs
and connect those to Asterisk servers.  Then just used LCR in the Samsung to
send dialed calls to appropriate trunks connected to asterisk. Then just set
the Dial plan in asterisk to send the call to the appropriate place-the
other asterisk servers. The other asterisk will use the DID capability to
send the call to the appropriate phones.  I have this set up using Toshiba
PBX's in my lab and works great.  

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
sgup015 at ec.auckland.ac.nz
Sent: Wednesday, October 20, 2004 7:15 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Samsung DCS70 PABX

Hi there,
I'm currently working with a customer who has 25 Phones as part of their
exisiting Telephone System which runs using a Samsung DCS70 PABX.  They
currently have a Single PRI coming in with a block of 100 Phone Numbers.

I'm trying to connect them to our SIP Proxy so that we can connect their
multiple sites together and provide a "local" telephone system using VoIP.

After a search on google, I don't believe this PABX supports VoIP directly
on
it.

Is there a way that anybody can recommend by which they don't have to phase
out
their PABX but can also make use of our SIP Proxy for Outgoing Calls?

Cheers,
Sahil
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users