[Asterisk-Users] Comments on proposed * setup

[Ariel's Hotmail]

el Flynn wrote:
> Hi all,
>
> Just wanted to see what you guys have to say about the setup we're
> planning to install - 16 incoming POTS lines, 50 extensions. As it is,
> I've got two options:
>
> 1) Lots of ATAs
> 1 x * server
> 4 x TDM04B for 16 incoming lines (can't do fractional E1 - client's
> requirements)
> 25 x Sipura SPA-2000 connected to a total of 50 analog phones

option 2 but with 3 channel banks one with fxo ports for the pots lines. 4
TDM04B could be a problem. and I would use one TE410p board instead of 3
T100p.


> 2) Channel banks
> 2 x * servers (due to PCI slot limitations...)
> 4 x TDM04B (as above)
> 2 x T100P
> 2 x 24-port channel bank
> 1 x Sipura SPA-2000 connected to 2 analog phones
>
> Option #1 is cheaper but (i suppose) more hassles in terms of
> SIP.conf, wall warts etc.
>
> Option #2 is more expensive (for me anyways) but more manageable (?)
> I'm leaning more towards this but am concerned about costs.
>
> Anyone can provide hints, suggestions, comments as to why I would
> choose one option over the other? I _can't_ do anything about costs,
> due to certain licensing and legal issues here in my country, so
> suggestions like "buy 'em from eBay and save cost" won't do any good
> :)
>
> cheers,
> flynn
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users