[Asterisk-Users] X100P sending out tone all the time?

[Ilia Mirkin]

You want to use the wcfxo module with the X100P. wcfxs is for the
TDM400P card.

---
Ilia Mirkin
imirkin at mit.edu

On Wed, 2004-10-13 at 03:43, Neil Cherry wrote:
> I'm in the process of setting up the X100P card and I am getting
> continuous tone on the X100P but only if plugged into the POTS
> line. Here is what I have so far:
> 
> # lsmod
> Module                  Size  Used by
> wcfxs                  26912  0
> zaptel                223460  1 wcfxs
> crc_ccitt               1920  1 zaptel
> rtc                    10424  0
> usbcore               108644  1
> mxser                  25948  0
> via_rhine              17416  0
> 
> # cat /etc/zaptel.conf
> #
> loadzone = us
> defaultzone=us
> fxsks=1
> 
> # ztcfg -vv
>  
> 
> Zaptel Configuration
> ======================
>  
> 
> 
> 
> Channel map:
>  
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
>  
> 
> 1 channels configured.
>  
> 
> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
> 
> Earlier I didn't get the above error.