[Asterisk-Users] X100P sending out tone all the time?

[Neil Cherry]

I'm in the process of setting up the X100P card and I am getting
continuous tone on the X100P but only if plugged into the POTS
line. Here is what I have so far:

# lsmod
Module                  Size  Used by
wcfxs                  26912  0
zaptel                223460  1 wcfxs
crc_ccitt               1920  1 zaptel
rtc                    10424  0
usbcore               108644  1
mxser                  25948  0
via_rhine              17416  0

# cat /etc/zaptel.conf
#
loadzone = us
defaultzone=us
fxsks=1

# ztcfg -vv
 

Zaptel Configuration
======================
 

 

Channel map:
 

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
 

1 channels configured.
 

ZT_CHANCONFIG failed on channel 1: No such device or address (6)

Earlier I didn't get the above error.

-- 
Linux Home Automation         Neil Cherry       ncherry at comcast.net
http://home.comcast.net/~ncherry/               (Text only)
http://hcs.sourceforge.net/                     (HCS II)
http://linuxha.blogspot.com/                    My HA Blog