[Asterisk-Users] TDM400P stop responding

[Steve Totaro]

Rich,

Is this the case for you as well, please let us know.

Might be a problem if you have a four port FXO board.

Thanks,
Steve


----- Original Message ----- 
From: "Michael George" <george at mutualdata.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Friday, October 08, 2004 7:18 AM
Subject: Re: [Asterisk-Users] TDM400P stop responding


> On Wed, Oct 06, 2004 at 08:53:21PM -0800, rich allen wrote:
> >
> > have a TDM400 w/ 1 FXS & 1FXO card. after about a day or so the FXO
> > stops working. after a  reboot i get the following error. to get the
> > card working again i have to shutdown, physically unplug/replug the
> > card (reboot only, power off/on does not work) any ideas what may be
> > going wrong here?
>
> Make sure your FXO is *not* on port 1 on the card...  I had a problem
where I
> could not get 3 days of uptime before the system would lock of the card
would
> freeze.  Moving the FXO from port 1 to port 4 solved that problem.
>
> -- 
> -M
>
> There are 10 kinds of people in this world:
> Those who can count in binary and those who cannot.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>